January 27, 2022


Through Education Matters

Tips for Caring for Modern Diesel Engines to Work Optimally

Tips for Keeping Your Diesel Engine in Good Condition - Industry Today %

There are two main keys that must be considered when maintaining a modern diesel engine. The first is the condition of the engine oil. The diesel engine workload is extreme because the high compression ratio and the presence of the turbo result in extremely high temperatures and pressures in the engine compartment. Hence, diesel engines need the right oil according to Toyota’s recommendations.

The latest diesel engine fuel (BBM) is also not recommended to use low quality because of the application of a common rail system that sprays fuel into the combustion chamber with an electronically controlled extra high pressure injector. Dirt can damage these very precise injectors.

What steps should be taken so that the diesel engine remains durable and works optimally?

1. Use the Right Fuel

Diesel fuel with low sulfur content and high cetane content makes the engine work optimally and with minimal disturbance. Meanwhile, high sulfur content will disrupt the fuel distribution system, decrease engine performance, and reduce engine life. Adjust the fuel used with the recommendations in the vehicle manual. And this is recommendation for you for repair service your diesel prosourcediesel.com

2. Check the Quality of the Fuel Filter

The optimal performance of the diesel fuel filter ensures that impurities will not enter the fuel injection system. There is a warning light on the instrument panel of the car that lights up when the diesel filter is dirty. Immediately clean or replace with a new diesel filter.

3. Clean Air Filters and Monitor Water Sedimenters

The component that must also be checked is the air filter which filters the air that is introduced into the combustion chamber. Clean air can make engine performance maintained and use fuel more efficiently. Besides of course reducing the appearance of scale in the moving components.

The water sedimenter serves to capture the water content in the fuel line so it doesn’t flow into the fuel system so it doesn’t interfere with engine performance and keeps the risk of rusting. Immediately drain the water sedimenter when the water sedimenter indicator light on the instrument panel lights up because the water is full.

4. Warm up the engine for a while and wait a moment to turn off the engine

It doesn’t take long, just start the engine for about 2 minutes to make sure the lubricant has moved evenly to lubricate all engine components. Leave the engine running or idle for 1 minute and then turn off the engine so that there is a chance to cool engine components that work in extreme conditions, especially the turbo.

5. Mandatory Change of Engine Oil

Check the oil level via the dipstick to make sure it doesn’t decrease before it’s time to change. Change the diesel engine oil regularly every 6 months. That way, the oil is always in good condition and can carry out the task of protecting the diesel engine components properly.